A robot pool cleaner is an absolute necessity in keeping your pool crystal clean. As smart and efficient as gutters can be, they’re still a piece of tech and susceptible to some issues. Pool troubleshooting Although issues generally vary depending on the type of pool cleaning unit you have — whether it is a pool robotic pool cleaner, a wall climbing pool cleaner, or a pool vacuum Robot — troubleshooting can help you save time and money in both the short and long run.
This guide addresses the most common pool cleaning robot issues and provides handy solutions so your robot pool gets back to work in no time.
How to Fix: Robot Won’t Power On or Move
If your automatic pool cleaner has no power, the easiest first step is to hit the basics. Make sure the power is plugged in all the way and the outlet is working. Look for damage to the power cord, and ensure that it is securely plugged into the transformer unit.
Pro tip: Test another outlet or reset the GFCI.
The Robot Doesn’t Climb Walls
Reason: A wall climber pool cleaner that won’t climb the walls of your pool may struggle with dirty brushes or insufficient suction.
Clean the rollers, and that nothing is blocking the intake.
You might also want to adjust the buoyancy settings if available on your unit.
Other robots, such as those made by Beatbot, adjust for pool walls with sophisticated sensors.
Explore models like:
- Beatbot AquaSense 2 Ultra
- Beatbot AquaSense 2 Pro
- Beatbot AquaSense 2
These intelligent cleaners offer excellent climbing and cleaning performance for all in-ground pool surfaces and inclinations.
Robot “Stucks” or goes “Looping”
Is your automatic pool cleaner trapped on a slope or drain grid?
Inspect for tiles that are loose or sticking up.
Examine the filter and the impeller for blockages.
Reel in any slack in the cable to avoid kinks and snags.
If you’ve been wondering what is a pool booster pump, it may, in the case of older pool cleaner models, be used to provide that extra thrust. But with a newer smart model, you can run it without a booster.
Not Sucking Algae or Debris
Cleaning algae or debris is average not very good not at all good is not cleaning the algae or other debris.
One common question is, will a pool robot remove algae? The answer: yes — if your filters are clean and the brush system is working.
Replace or clean filters if algae blooms have been intense.
For long setting green spots, you can also choose to pre-treat the pool before you backwash algae using your pool vacuum.
See if your model is compatible with algae-specific filters or soft-bristle rollers. Clear the skimmer basket to minimize surface debris before the robot starts its cycle.
Inadequate Circulation and Cleaning of the Water
Your robot is going through the motion but not cleaning it effectively. This could mean:
- Clogged intake ports
- Overfilled debris baskets
- Wrong programs or zones 2
Ensure that your vacuum pool cleaner or pool vacuum’s setting is set to cover the full surface, and no settings have been inadvertently modified.
Dealing with Advanced Issues
If you’ve recently tried more thorough methods of cleaning, like how to acid wash pool or how to drain an inground pool without a pump, ensure the robot is suitable for use with new surfaces or water chemistry.
Water pH, alkalinity or even residue after treatment could be affecting your swimming pool robot cleaner.
Conclusion: Keep Your Robotic Pool Cleaner in Optimum Condition
A robot pool cleaner can be a valuable resource in maintaining a sparkling-clean pool — but not if it’s unable to perform. By mastering these common troubleshooting methods above, you can keep your pool vacuum robot reliable through all the seasons. And when you outfit your Beatbot to run the AquaSense 2, you now have access to state-of-the-art performance enhancements and self-diagnostic aids.
Do not let these little disruptions take away from the joy of your pool—your robotic pool cleaner can recover with a minimal amount of care.